Anti-slip GRP ramps for safer access
Byggkomposit supplies low self-weight, corrosion resistant GRP ramps for industry, infrastructure, public spaces and technical installations.The range covers both complete pedestrian ramps and chamfered edging ramps that create smoother transitions between GRP grating, platforms and adjoining floor surfaces. The anti-slip top surface provides a secure grip in both dry and wet conditions.
Ramps that ease movement between levels
Changes in level along walkways, platforms and working areas can create a trip hazard and make access difficult for people or equipment on wheels.
GRP ramps create a smoother transition and can ease access for pedestrians, wheelchairs, pushchairs, service trolleys and other smaller wheeled aids and equipment.
The walking surface can be built with open mesh d2 Dura Grating for effective drainage, or with a solid surface GRP panel where a continuous surface is required. The solution can be completed with structural support profiles, handrailing, edge protection and suitable fixings.
GRP combines low weight with high resistance to moisture, salt and many chemicals. This makes the material particularly suitable outdoors, on industrial sites and in other locations where metal or timber require extensive maintenance.
Benefits of GRP ramps
Smoother transition
A chamfered or sloped walking surface reduces sudden changes in level and supports a safer, more accessible route.
Anti-slip surface
The anti-slip ramp surface provides a low slip risk and secure grip in both dry and wet conditions.
Low weight
Low self-weight panels and profiles simplify transport, handling and installation and can reduce the need for heavy lifting.
Corrosion resistant
GRP does not rust or rot and offers high resistance to moisture, salt, weathering and many chemicals.
Two types of ramp for different needs
We offer both complete GRP ramps and chamfered edging ramps. The right solution is selected on the basis of the change in level, loading, foot traffic, accessibility requirements and the adjoining construction.
Complete pedestrian and access ramps
Complete GRP ramps are built up from an anti-slip walking surface, a load-bearing support structure and, where required, handrailing and edge protection.
The ramps can be used to create safe routes between platforms, walkways, entrances and other areas at different heights. The construction is designed around the change in level, loading, width and safety requirements of the project.
The walking surface can be specified in open mesh GRP grating where water and debris need to pass through, or in solid panels where a continuous surface is required.
- Designed around the change in level and available space
- Anti-slip walking surface for dry and wet conditions
- Can be combined with handrailing and edge protection
- Open mesh or solid walking surface
- Low self-weight construction that simplifies installation
Chamfered edging ramps for smaller level changes
Chamfered GRP profiles are fitted at the edge of grating, platforms and other raised walking surfaces. They create a smoother transition to concrete, asphalt or an adjoining floor.
The profiles suit locations where a smaller difference in height needs to be bridged and can ease access for pedestrians, trolleys, wheelchairs and other wheeled equipment.
The anti-slip top surface provides a secure grip, while the low weight simplifies cutting, handling and installation.
- Reduces sudden changes in level
- Matched to the adjoining walking surface
- Anti-slip ramp surface
- Can be cut to project dimensions
- Installed with suitable mechanical fixings
Developed for safe walking surfaces in wet and rainy conditions
d2 Dura Grating has a hard-wearing anti-slip surface developed to deliver a low slip risk in both dry and wet conditions.
Testing shows that the surface retains 95 per cent of its anti-slip performance after one million footsteps, making it suitable for ramps and routes with regular foot traffic.
The right walking surface should always be selected on the basis of the users, the environment and the type of traffic. For routes used by small wheels, walking sticks or other mobility aids, a smaller mesh size or a solid surface may be more suitable than traditional open mesh grating.
Secure grip
The anti-slip surface contributes to a low slip risk in rain, wet conditions and other exposed environments.
The right mesh size
Smaller apertures or a solid walking surface can be chosen for wheelchairs, small wheels and other mobility aids.
Effective drainage
Open mesh GRP grating allows rainwater and debris to pass through the walking surface, reducing standing water.
Designed around users and site conditions
An accessible ramp has to be designed as a whole. Gradient, width, length, landings, handrailing, edge protection and connections must be adapted to the site and to the requirements applicable to the project.
The low weight and modular build-up of the GRP system provide good scope for creating a project-specific solution for entrances, walkways, platforms and public spaces.
The walking surface can be selected according to who will use the ramp. A solid panel or grating with smaller apertures can provide a smoother route for wheelchairs, walking frames, pushchairs and small wheels.
- Ramp gradient is designed to the requirements of the project
- Landings may be required on longer ramps
- Handrailing and edge protection are specified to suit the use
- The walking surface is chosen for foot traffic and wheeled access
Designed for loading, level change and use
A complete GRP ramp can consist of a walking surface, structural support profiles, supports, handrailing, edge protection and fixings. The components are selected on the basis of the ramp length, width, change in level, loading and surrounding environment.
d2 Dura Grating provides an open, free-draining walking surface. Dura Grating Solid Top or Dura Slab can be used where a solid surface is required. Dura Profile can be used in the supporting structure and Dura Handrail as the safety handrailing system.
The solution is designed around factors including:
- foot traffic and any wheeled equipment
- concentrated or uniformly distributed loading
- clear span
- allowable deflection
- ramp gradient and length
- the need for landings
- handrailing and edge protection
- substrate and fixings
- corrosive or electrical environments
Byggkomposit can assist with the selection of walking surface, profiles, handrailing and technical detailing.
Four properties that simplify the project
Safer
The anti-slip walking surface provides a secure grip, while the ramp design reduces sudden changes in level between adjoining surfaces.
Lighter
GRP weighs considerably less than many traditional materials and can reduce the need for heavy lifting during transport and installation.
Long lasting
GRP does not rust or rot and normally requires no painting, galvanising or anti-corrosion treatment.
Adaptable
Walking surfaces, support profiles, handrailing, edge protection and fixings can be combined to suit the use and layout of the ramp.
GRP ramps for industry, infrastructure and public spaces
GRP ramps can be used in new construction and when adapting existing walkways and platforms. They are particularly suitable where low weight, anti-slip performance and corrosion resistance are important.
- Industrial walkways
- Working platforms
- Entrances and public routes
- Rail and station environments
- Water and wastewater facilities
- Energy and power installations
- Ports, marinas and pontoons
- Process and chemical industry
- Roofs and technical installations
- Warehousing and logistics areas
- Service and inspection routes
- Transitions at GRP grating
- Transitions between floors at different levels
- Routes for wheelchairs, walking frames and service trolleys
Lighter ramps with less maintenance
GRP combines high strength with low weight. Compared with many steel solutions, the components are easier to transport, cut and install.
The material does not rust or rot and normally requires no painting, galvanising or anti-corrosion treatment. This makes GRP particularly suitable in environments with moisture, salt and chemicals.
Unlike soft rubber transitions, GRP is dimensionally stable and can be integrated with load-bearing walking surfaces and platform systems. The material choice should always be based on the change in level, loading, use and substrate.
Simpler installation
Low self-weight components and mechanical fixings can reduce the need for heavy lifting and welding.
Less maintenance
GRP normally requires no painting, galvanising or anti-corrosion treatment.
Lower lifecycle cost
A long service life and limited maintenance can reduce costs over the working life of the ramp.
Chamfered GRP profiles for safe transitions
Chamfered edging ramps are used to create a smoother transition at the edges of GRP grating, platforms and other raised walking surfaces.
The profiles can be cut to project dimensions and combined with the relevant Dura Grating panels. The right profile is selected on the basis of panel depth, change in level and the adjoining surface.
GRP edging ramps
Chamfered, anti-slip GRP profiles that create a smoother transition between grating, platforms and adjoining floor surfaces.
- Reduces sudden changes in level
- Anti-slip ramp surface
- Low weight for easier handling
- Can be cut to project dimensions
- Several sizes for different panel depths, subject to current product data
A material for exposed and corrosive environments
GRP is not affected by corrosion in the same way as steel and normally requires no painting, galvanising or anti-corrosion treatment. This results in limited maintenance and can contribute to a long service life.
The low weight can also simplify transport and reduce the need for heavy lifting equipment during installation.
Dura Composites has developed methods for handling installation offcuts and end-of-life GRP products. The material can be reused or processed into raw material for new composite products rather than going straight to landfill.
Questions and answers about GRP ramps
A GRP ramp is a sloped walking surface manufactured from glass reinforced plastic. It can be built as a complete ramp with a walking surface, structural support profiles and handrailing, or consist of a smaller chamfered profile that bridges an edge or change in level.
GRP combines low weight with anti-slip performance and high resistance to corrosion.
From change in level to finished ramp solution
We help you specify the right GRP ramp based on the change in level, users, loading, available space and safety requirements.
Contact us early in the project and we can assist with the choice of walking surface, gradient, supporting structure, handrailing, edge protection and fixings. We can also provide site visits, cutting to size and installation.
Support in selecting the right ramp, walking surface and structural solution.
Information on gradient, loading, clear span, handrailing and connections.
We review changes in level, dimensions, substrates and installation conditions on site.
Panels and profiles can be supplied cut and adapted to the project drawings.
We can offer both material supply and installation of the complete ramp solution.
More about GRP Ramps
Byggkomposit is the exclusive Swedish distributor for Dura Composites. Technical data sheets, load tables and certificates are published on the manufacturer's own product page.