GRP access structure at a vehicle wash
Guide

Specifying GRP

Choose a product and configuration to get ready-made text for your drawing or specification. Further down you will find the key facts on resin, fire classification, loads and colour.

Guidance – not structural design

This guide gives quick initial guidance. Answers, texts and load tables are based on standard conditions and do not replace structural design or verification in your project. We accept no responsibility for errors in the information or for how it is interpreted and used – that responsibility lies with the client and their structural engineer. Need an exact answer? Send us your drawings or project details and we will review them. Read more in Technical disclaimer.

Text generator

The text updates as you make your choices. Values in [ ] are filled in for the project.

See your text ↓

Products in the text

View the product – images and dimensions

Surface

Resin

The manufacturer's standard for this product.

Unit: m²

Include

Your text

Supplier: Byggkomposit Sverige AB, Swedish supplier of Dura Composites products.
Manufacturer: d² Dura Grating Standard Mesh by Dura Composites, or equivalent meeting all requirements below.
Moulded grating of glass reinforced plastic (GRP) with load-bearing capacity in both directions.
Depth 38 mm. Mesh 31 mm, open area 66%. Self-weight no more than 13.2 kg/m².
Resin: orthophthalic polyester.
Surface: gritted anti-slip surface.
Colour: dark grey.
Fire classification Bfl-s1 to EN 13501-1.
The anti-slip surface shall retain at least 95% of its slip resistance after one million footfalls, verified by testing.
An Environmental Product Declaration (EPD) to EN 15804 shall be provided.
Warranty: at least 25 years.
Fixing: fixings in stainless steel to the manufacturer's instructions.
Quantity: [state] m².
Quotation and technical data: byggkomposit.se

Always check load, span and fire requirements against the project conditions. We are happy to review the text.

Resin

Orthophthalic and isophthalic polyester are standard. Vinyl ester is made on request.

ResinChoose whenSupply
Orthophthalic polyesterMoulded grating, Dura Slab and anti-slip products – most indoor and outdoor environmentsStandard
Isophthalic polyesterProfiles, handrails and ladders – and grating where the chemical table requires itStandard
Phenolic resinRequirements for low smoke and low toxic fume emissions, for example tunnels and offshoreStock: d² Dura Phenolic Grating, Dark Russet
Vinyl esterChemicals that orthophthalic and isophthalic polyester cannot withstandOn request

Where chemicals are present, check chemical, concentration and temperature in the chemical resistance table. More about the resins in GRP resin types.

Fire classification

The fire classification to EN 13501-1 applies to the product – not to the fire resistance of the complete structure, for example R30.

ProductFire classificationStandard
Dura Deck Inspire (porcelain)A1 – non-combustibleEN 13501-1
Dura Deck Aluminium 18 and 27 mmA2fl-s1 and A2-s1,d0EN 13501-1, tested by a UKAS-accredited laboratory
d² Dura Grating Standard Mesh, Mini Mesh 30–55 mm, Solid Top and Rectangular MeshBfl-s1EN 13501-1, flooring
d² Dura ProfileBfl-s1 in the fire-rated version, on requestEN 13501-1
Dura HandrailClass 2 (surface spread of flame)BS 476 Part 7 – no Euroclass stated
d² Dura Phenolic GratingClass 0 and BS 6853British standards – no Euroclass stated

BS EN 13501-1 on Dura's pages is the British edition of EN 13501-1 – the same standard as SS-EN 13501-1 in Sweden. BS 476 and BS 6853 are British tests that cannot be translated into a Euroclass.

The difference between fire classification and R30 is explained in GRP fire classification.

Loads

Maximum clear span in mm at 5 kN/m² uniformly distributed load and deflection no more than L/200. The values are for guidance and must be verified in the project.

GratingDepthSpan
Standard Mesh26 mm510
Standard Mesh38 mm780
Standard Mesh50 mm970
Mini Mesh23 mm450
Mini Mesh35 mm710
Mini Mesh45 mm880
Mini Mesh55 mm1,110
Solid Top29 mm710
Solid Top41 mm890
Solid Top53 mm1,240

Spans in both directions

Moulded grating carries load equally in both directions. Pultruded grating and Slab span in one direction – show the span direction on the drawing.

Other load cases

Point loads, other deflection limits and the full table are in the load tables.

Trench covers

d² Dura Grating Rectangular Mesh: load class B125 to EN 124, span no more than 630 mm.

Design

How to work out load and span: Calculating load and span.

Good to know

Non-combustible decking

Dura Deck Inspire is class A1 and Dura Deck Aluminium A2-s1,d0 – the two highest Euroclasses.

Colour

Dark grey is in stock. d² Dura Phenolic Grating is in stock in Dark Russet, panel 3660 × 1220 mm. Yellow, green and blue on request, depending on the product.

Surface and slip resistance

A gritted anti-slip surface is standard. It retains 95% of its slip resistance after one million footfalls to BS 7976. Read more in Anti-slip GRP grating.

Panels and cutting

Grating is supplied in standard panels, for example 3660 × 1220 mm, and cut on site. Cut edges are sealed as described in the installation instructions.

Fixing

Fixings in stainless steel, selected for grating depth and support structure. Specify acid-resistant stainless steel (A4) for saltwater and chemicals.

Electrical safety

GRP does not conduct electricity and is non-magnetic – often worth stating as a requirement for switchgear and railway projects.

Environmental data

EPD to EN 15804. Registration in Byggvarubedömningen is in progress.

Minimum order

Panels and profiles in vinyl ester, and some panels in isophthalic polyester, may be subject to a minimum order quantity. Ask us early in the project and we will check what applies.

Products and documentation

Images, dimensions and item numbers are on each product page.

Technical documentation

Frequently asked questions

What should a GRP specification text include?

Product and manufacturer, material and resin, depth or size, surface, colour, fire classification and fixing. Load and span are stated if they are not already shown on the drawing.

What fire classification does GRP grating have?

d² Dura Grating Standard Mesh, Mini Mesh 30–55 mm, Solid Top and Rectangular Mesh are classified Bfl-s1 to EN 13501-1, the flooring class. The classification applies to the product, not to the fire resistance of the complete structure.

Which resin should be stated on the drawing?

Orthophthalic polyester is standard for moulded grating and Dura Slab, isophthalic polyester for profiles, handrails and ladders. Where chemicals are present, the resin is chosen from the chemical resistance table. Vinyl ester is made on request.

What does BS mean in BS EN 13501-1?

BS EN 13501-1 is the British edition of the European standard EN 13501-1. In Sweden the same standard is called SS-EN 13501-1. BS 476 and BS 6853, on the other hand, are British tests that do not correspond to a Euroclass.

Need project-specific text or a load calculation?

Send us your drawing or project conditions and we will come back with a proposal.