Technical information and important notices

1. Purpose of the information

Technical information on this website — material descriptions, load and span tables, product data, CAD and BIM files, installation instructions and project examples — is intended as guidance when selecting a product. It does not replace design, structural calculation or verification in the individual project.

2. Conditions for stated values

• Values apply to the support conditions, spans, loads and temperatures stated in each table.
• Stated loads assume correct installation, fixing and supporting structure.
• Chemical resistance, fire classification, slip resistance and UV exposure must be assessed against the actual service environment.
• Images and examples show possible configurations and do not constitute a specification.

3. Responsibility for design

Responsibility for sizing, structural choices, compliance with applicable regulations and verification that the product is suitable for the intended use rests with the customer and their designer. Our advice does not constitute a design commission unless separately agreed in writing.

4. Current documentation prevails

Products, ranges and data may change. Current datasheets, declarations of performance, EPDs and safety data sheets from the manufacturer take precedence over information on this website. Where the website differs from an order confirmation or product documentation, the order confirmation and documentation prevail.

5. Environmental and sustainability data

Environmental data must be read against the EPD that applies to the specific product and the functional unit stated there. Comparisons between materials are only valid when the same life-cycle stages and the same functional unit are used. We make no general environmental performance claims without verified data to support them.

6. Fire, slip resistance and personal safety

Fire classification and slip resistance apply to a specific product, surface finish and test standard. Project requirements must be verified against the correct test report before the product selection is fixed.

7. Errors, changes and external links

We work to keep the information accurate but cannot guarantee that it is always complete, current and free from errors, and we reserve the right to change content without prior notice. The website may link to documents held by manufacturers and other third parties; we are not responsible for the content of external websites.

8. Questions and corrections

If something appears incorrect, or if you need documentation that is missing, contact us and we will correct or supplement it.