Byggkomposit supplies GRP stairs, treads, access ladders, stepovers and ramps for industry, infrastructure, rail, energy and other technical environments.The solutions combine low self-weight with gritted walking surfaces, corrosion resistance and a low maintenance requirement. The design is governed by level difference, loading, available space, users and the safety requirements of the project.
Our access range covers both products that improve existing walking surfaces and complete structures for safe movement between levels.
GRP stair treads and anti-slip covers suit new and existing staircases. Access ladders provide entry to roofs, shafts and technical equipment. Stepovers create safe routes over pipework, plant and other obstacles, while ramps smooth the transition between levels.
Components can be combined with GRP profiles, grating, solid panels, handrailing, landings, gates and fixings to form a solution matched to the project.
Structural GRP stair treads for new staircases and anti-slip stair tread covers for existing structures.
Fixed access and service ladders for roofs, shafts, chambers and technical equipment.
Elevated access structures with landings and handrailing for safe passage over pipes, plant and other obstacles.
Access ramps and chamfered edging profiles with an anti-slip surface for smoother level changes.
Gritted treads and walking surfaces give grip in dry and wet conditions. Slip requirements are assessed per environment.
Low self-weight can simplify transport, handling and installation and reduce the need for heavy lifting equipment.
GRP does not rust or rot and is used in environments with moisture, salt, weather exposure and many chemicals. Chemical resistance is verified against the actual medium.
Treads, profiles, handrailing, landings and fixings can be combined around the height, loading and layout of the project.
Byggkomposit supplies both structural GRP stair treads for new structures and anti-slip stair tread covers for existing staircases in steel, timber or concrete.
Structural treads can be manufactured from open GRP grating or solid Dura Slab panels. They can be combined with structural Dura Profile sections, landings and Dura Handrail systems to form complete stair structures.
For existing staircases we offer slimline tread covers and contrasting stair nosings. Fitted over an existing load-bearing structure, they improve grip and visibility without replacing the whole staircase.
Load-bearing treads for new staircases, walkways, platforms and other access structures.
Slimline anti-slip covers for existing treads in steel, concrete, aluminium or timber.
A contrasting nosing makes the edge of the tread easier to see and can reduce the risk of missteps.
Choose free-draining grating or a solid panel to suit the environment, users and project requirements.
GRP access ladders and service ladders are used to reach roofs, platforms, shafts, chambers and technical equipment.
The material combines low weight with resistance to corrosion, moisture and many chemicals. Its electrically non-conductive properties make GRP particularly relevant at power installations, switchgear rooms and other electrified environments.
Ladders can be configured for the height in question and completed with safety cages, walk-through access at the top, handrails, back protection, landings and project-specific fixings.
GRP does not conduct electricity, which can be an advantage around electrical installations and power plants.
The material does not rust and suits water treatment, marine, industrial and chemically exposed sites.
Ladder length and configuration can be adapted to the building, shaft or installation.
Safety cages, walk-through access, handrails, landings and other project-specific details can be added.
GRP stepovers create a safe route over pipe runs, bunds, conveyors, machinery and other installations that obstruct movement.
The structure is normally built from stairs, a raised landing, structural GRP profiles and handrailing. It can be configured as a straight crossing or with a turning flight where space is limited.
Each solution is sized for the height and width of the obstacle, the available space, the loading and the safety requirements of the project. Stepovers can be supplied as pre-assembled sections or as components for assembly on site.
Height, width, stair configuration and landing are matched to the installation being crossed.
Choose a straight structure or a compact layout with a 180-degree change of direction.
Treads, landings, handrailing, toe boards and gates can be combined to suit the project.
The structure can be delivered in finished sections or as a system ready for assembly.
GRP ramps create smoother, safer routes between different levels. The range covers both complete access ramps and chamfered edging profiles for smaller changes in level.
The walking surface can be specified as open GRP grating for efficient drainage or as a solid panel where a continuous surface is required. Complete ramps can also include structural profiles, handrailing, edge protection and landings.
Gradient, width, walking surface and safety details should always be matched to the site conditions, the users and the requirements applicable to the project.
The sloping surface reduces abrupt level changes between walkways, platforms and adjoining floors.
The gritted top surface provides secure grip in both dry and wet environments.
Choose free-draining grating or a continuous solid surface to suit the users.
Walking surface, structure, handrailing, edge protection and landings can be combined into a project-specific design.
Suitable when the project needs:
Suitable when the project needs:
Suitable when the project needs:
Suitable when the project needs:
The choice should be based on the level difference, the users, loading, available space and the safety requirements of the project. Byggkomposit will help you compare the options and develop a suitable system solution.
Get help choosing an access solutionGRP solutions are particularly suitable where low weight, anti-slip performance, corrosion resistance or electrically non-conductive properties matter.
We help you select and design the right solution based on level difference, loading, available space, users and safety requirements.
Contact us early in the project and we can assist with product selection, design, technical documentation, made-to-measure components, site visits and installation.
Help choosing between stairs, ladders, stepovers and ramps.
Guidance on height, loading, spans, gradients, handrailing and fixings.
We review dimensions, obstacles, substrates and installation conditions on site.
Components and structures can be adapted to project drawings and site conditions.
We can offer both material supply and installation of the complete access solution.
Examples of how the product is used in real projects internationally.
For a time critical refurbishment, six complete staircase systems were delivered, up to 80% lighter than steel, reducing transport and installation costs. The example shows GRP stairs and access in practice where the line needs to remain operational.
See the reference projectGRP can be used for stairs, stair treads, access ladders, service ladders, stepovers, platforms, landings and ramps.
Components can be combined with structural profiles, grating, solid panels and handrailing to form project-specific structures.
Expert support for GRP solutions.
Detailed planning and CAD.
We come to your facility.
Certified installers on site.
Fast and accurate cost estimates.
Byggkomposit is the exclusive Swedish distributor for Dura Composites. Technical data sheets, load tables and certificates are published on the manufacturer's own product page.
