Safe and corrosion-resistant GRP fencing for demanding environments
Byggkomposit supplies modular GRP fencing, gates and screening for rail, substations, industry, energy and other technical environments.The systems combine low self-weight infill panels with strong structural GRP profiles. The material is electrically non-conductive, resistant to corrosion and requires minimal maintenance, making it a long-life alternative to steel, aluminium and timber.
Modular solutions for perimeter protection and safe screening
GRP fencing is used to define and protect areas where traditional metal or timber fencing can be affected by corrosion, moisture, chemicals or electrical installations.
The system is built from low self-weight GRP panels, posts, support profiles, gates and fixings selected to suit the height, loading and security requirements of the project. The open mesh structure provides good visibility, ventilation and lower wind loading than fully solid panels.
The panels can be cut and worked with suitable standard tools without welding or other hot works. This simplifies adaptation and can contribute to faster installation, both in new build and refurbishment.
GRP does not rust or rot and normally requires no painting, galvanising or anti-corrosion treatment. The limited maintenance requirement supports a long service life and lower costs over time.
Benefits of GRP fencing
Electrically non-conductive
GRP does not conduct electricity, which makes it well suited to substations, rail, power facilities and other electrified environments.
Corrosion resistant
The material does not rust or rot and offers high resistance to moisture, salt, weathering and many chemicals.
Low weight
Low self-weight panels and profiles simplify transport, handling and installation and can reduce the need for heavy lifting.
Modular system
Panels, posts, profiles, gates and fixings can be combined into a solution tailored to the layout of the project.
Screening for rail, substations and power facilities
In environments with electrical equipment, overhead line equipment or high-voltage installations, metallic fencing can require additional protective measures and earthing.
GRP is electrically non-conductive and can therefore be a suitable alternative for perimeter protection, barriers and technical screening in electrified environments. The properties of the material reduce the risk of the fence conducting electrical current, but do not replace the other safety measures or the electrical risk assessment for the project.
Dura Fencing is used for applications such as:
- boundary and perimeter protection
- trackside fencing
- gates at platform ends
- demarcation of train depots
- screening at substations
- transformer stations
- power and energy facilities
- protection around technical equipment
The open construction allows visual inspection and continuous ventilation while the area remains clearly defined.
Electrically non-conductive GRP
Unlike metal, GRP does not conduct electricity. This can offer safety benefits at substations, on rail and around other electrical installations.
Cut and installed without welding
The panels can be cut with suitable standard tools and installed using mechanical fixings. This reduces the need for hot works and simplifies adaptation on site.
No metal scrap value
As GRP does not carry the same scrap value as steel, aluminium or copper, the material is normally less attractive to metal theft.
Four qualities that simplify the project
Dura Fencing combines moulded GRP panels with structural Dura Profile sections. The system can be supplied as components or as prefabricated sections depending on the layout and programme of the project.
Safer
Its electrically non-conductive properties make GRP suitable for screening on rail, at substations and power facilities where metallic materials can require additional protective measures.
Lighter
The low weight makes panels, gates and profiles easier to transport, position and install than many comparable steel solutions.
Long lasting
GRP does not rust or rot and normally requires no painting, galvanising or anti-corrosion treatment. This makes it well suited to coastal sites, rail, industry and technical facilities.
Flexible
Infill panels can be combined with structural profiles, posts, gates and a range of fixing systems to meet project requirements.
GRP fencing for a range of applications
We supply modular fencing, gate and screening solutions for industry, rail, energy, water and technical infrastructure. Each solution is adapted to the required height, visibility, loading, environment and level of security.
Perimeter and boundary fencing
Modular GRP fencing to define and protect industrial sites, technical facilities, depots and other sensitive areas.
The open mesh structure provides visibility and ventilation while the panels create a clear physical boundary.
Trackside fencing and gates
GRP fencing is used as boundary fencing, trackside screening, gates at platform ends and for the demarcation of depot areas.
The low weight and the ability to install without welding simplify work where access to the site is restricted.
Screening for substations and electrical installations
Electrically non-conductive fencing and gates for substations, transformer stations, battery storage and other power and energy facilities.
The system can be used to restrict access while maintaining ventilation and visual inspection.
Screens for plant and equipment
GRP panels can be used to screen ventilation plant, pipework, technical equipment and services on rooftops, in car parks and in industrial environments.
Different mesh sizes can be selected depending on the required visibility, ventilation and level of screening.
Low self-weight gates for safe, controlled access
Dura Fencing can be completed with modular GRP gates for pedestrian access, platform ends, depots and technical areas.
The gates can be built using the same panels and structural profiles as the fencing system to create a consistent appearance. The low weight simplifies opening, closing and installation while retaining the electrically non-conductive and corrosion-resistant properties of the material.
Depending on project requirements, the solution can include:
- Single gates
- Double gates
- Self-closing gates
- Gates at platform ends
- Service and inspection gates
- Climb protection and anti-trespass protection
- Locking and project-specific ironmongery
Availability varies between different configurations. Contact Byggkomposit for current product information.
Specified to suit height, loading and environment
GRP fencing is built from infill panels, load-bearing posts, structural profiles and fixings. Components are selected according to the height of the fence, panel width, wind loading, crowd loading, substrate and application.
Dura Profile is used for load-bearing posts and frames. Infill panels can be supplied in different mesh sizes and thicknesses depending on the required visibility, ventilation and level of security.
Byggkomposit can assist with product selection, technical data, drawings and project-specific design. Any requirements for crowd loading, wind loading, fixings and security classification should be established for the individual project.
Project-specific design
The fence is specified to suit height, panel width, wind loading, crowd loading and substrate.
Several mesh sizes
Different aperture sizes can be selected to suit the required visibility, ventilation and screening.
Flexible fixings
A range of posts, frames and fixing systems can be used depending on substrate and structure.
Lighter fencing with less maintenance
GRP combines high strength with low weight. Compared with many metallic fencing systems, the panels are easier to transport, lift and install.
The material does not rust or rot and normally requires no painting, galvanising or anti-corrosion treatment. This reduces the need for recurring maintenance and can lower costs over the service life of the fence.
GRP is also electrically non-conductive and does not carry the scrap value of metal. This can offer practical and safety benefits where corrosion, electrical installations or metal theft are a concern.
Simpler installation
Low self-weight components and mechanical fixings reduce the need for heavy lifting and welding.
Less maintenance
GRP normally requires no painting, galvanising or anti-corrosion treatment.
Lower life cycle cost
A long service life and limited maintenance can reduce costs over time.
GRP fencing for industry and infrastructure
GRP fencing is particularly well suited where the material is exposed to moisture, salt, chemicals or electrical installations, and where low weight and minimal maintenance are important.
- Rail and train depots
- Substations and transformer stations
- Power and energy facilities
- Battery storage and electrical installations
- Industrial facilities
- Water and wastewater treatment
- Process and chemical industry
- Ports and marine environments
- Car parks
- Rooftop installations and technical equipment
- Public environments
- Handrail infill
- Gates and access protection
- Ventilation and privacy screens
Fencing developed for demanding environments
GRP is not affected by corrosion in the same way as steel and normally requires no painting, galvanising or anti-corrosion treatment. This gives a limited maintenance requirement and can extend the service life of the structure in exposed environments.
d2 panels are developed for high structural performance in relation to their weight. The low weight can reduce the need for heavy transport and lifting during installation.
Dura Composites has also developed methods for handling installation offcuts and end-of-life GRP products. The material can be reused or processed into raw material for new composite products.
Panels for fencing, gates and screening
The range comprises smooth non-gritted GRP panels developed for vertical applications such as fencing, gates, handrail infill and technical screening.
Questions and answers about GRP fencing
GRP fencing is a fencing and screening system built from glass reinforced plastic panels, posts and structural profiles.
The material combines low weight with corrosion resistance and electrically non-conductive properties. It is therefore widely used on rail, at substations, power facilities, industrial sites and in other demanding environments.
From design to completed fencing system
We help you develop the right fencing, gate or screening solution based on the application, height, loading, substrate and security requirements.
Contact us early in the project and we can assist with the selection of panels, profiles, gates, fixings and other components. We can also support with site visits, drawings, cutting to size and installation.
Support in selecting the right panels, profiles, gates and fixings.
Data for height, loading, wind loading, post centres and fixing.
We review dimensions, substrate, environment and installation conditions on site.
Panels and profiles can be supplied cut and adapted to the project drawings.
We can offer both material supply and installation of the complete fencing system.
More about Fencing & Gates
Byggkomposit is the exclusive Swedish distributor for Dura Composites. Technical data sheets, load tables and certificates are published on the manufacturer's own product page.